|
|
|
|
Power Supply Design Engineer Power Supply Design Engineer sought by a long established but progressive electronics company located in Cambridgeshire, specialising in the design & manufacture of high reliability switch mode power supplies and inverters for a range of industrial markets. Due to increasing demand for our products and services we require an additional senior design engineer to join our development department. This will be a challenging and rewarding role for the candidate who is able to work from concept through to detailed design before direct hands-on involvement in developing prototypes up to production release. You must be qualified to HND minimum, degree preferred, with at least 4 years power electronics design. Familiarity with EMC test methods and experience of pr...
| Location : | Cambridge (Cambridgeshire, East Anglia, UK, United Kingdom) | | Salary : | £20-40k | | Job Type : | Permanent | | Posted : | 16/11/2009 | |
|
|
|
|
|
|
|
|
Power conversion products Engineer - North East This market leader in controllers and accessories for electric vehicles is currently seeking a degree qualified experienced (min 3years) Power Electronics Engineer. Your role will be to design and develop switching power supplies, battery chargers and dc/dc converters, power electronic controls including motor controllers, Magnetic component design, Device selection, Product design from concept to production You must have : -Design and development of off line mains voltage switching power supplies at power level of 100W or more - Design and development of power factor correction (PFC) circuits for off line mains voltage switching power supplies - Design and test of switching power supplies to EMC standards - Thermal design of ele...
| Location : | Newcastle Upon Tyne (Tyne and Wear, North East, UK, United Kingdom) | | Salary : | £30-40k | | Job Type : | Permanent | | Posted : | 16/11/2009 | |
|
|
|
|
|
|
|
|
Senior Power Electronics Engineer This market leader in controllers and accessories for electric vehicles is currently seeking a Lead engineer for circuit design. Your role will be to design and develop power electronic controls including power supplies and motor controllers, main power circuit, gate drive and current feedback from concept to production, assist senior managers in defining the company technology roadmap. You must have: - Design and development experience using power MOSFETs or IGBTs - Design and development of power electronics for applications of more than 100W. - Design and test of power electronic products to meet EMC standards - Thermal design of electronic equipment rated at more than 100W - Familiar with requirements of UL and CE marking Desirable experie...
| Location : | Newcastle Upon Tyne (Tyne and Wear, North East, UK, United Kingdom) | | Salary : | £30-45k | | Job Type : | Permanent | | Posted : | 16/11/2009 | |
|
|
|
|
|
|
|
|
Windows CE - Software Engineer- 30-35k + Benefits - Cambridge You will have 3 years experience of windows CE for embedded application You will have C/C++ Software Engineer with Win CE device driver experience to define, develop and deliver software to support display R&D and manufacturing. You must be Degree qualified in Electronics, Software Engineering, Computer Science or similar subject. You will have good communication skills as you will be speaking to customers. You must have a strong programming background including Real-time, embedded software, and with hands-on analogue and digital electronics. This role would suit somebody who is a strong real-time, embedded software engineer who is looking to develop their skills in requirements capture and definition, test specification...
| Location : | Cambridge (Cambridgeshire, East Anglia, UK, United Kingdom) | | Salary : | £30-35k | | Job Type : | Permanent | | Posted : | 18/11/2009 | |
|
|
|
|
|
|
|
|
Embedded Software Engineer - Cambridge - c50'000
Working within the Mobile Multimedia group which designs SW and HW for the multimedia chips powering the next generation of mobile phones and media players.
This is an opportunity for a talented and creative embedded software engineer, to join an extremely strong technical team on the development of software for our low power multimedia processor VideoCore.
The role involves detailed design, coding and testing of software modules; with contribution to top-level discussions on the future development of VideoCore architecture. You will also work closely with our chip design engineers to support debug and test activities on peripheral devices.
We are looking for an engineer who fills the following job requirements:
• Significant...
| Location : | Cambridge (Cambridgeshire, East Anglia, UK, United Kingdom) | | Salary : | market rate | | Job Type : | Permanent | | Posted : | 16/11/2009 | |
|
|
|
|
|
|
|
|
Lead RF Systems Engineer (Connectivity)
An experienced payload systems engineer with a strong background in payload connectivity elements (such as RF switches, isolators, waveguide/coax) and their application to advanced telecommunications payloads is required to become a key member of the payload engineering team.
Working under an Engineering Manager, the role involves overseeing connectivity activities across all active projects including specification, problem resolution, validation and in orbit anomaly follow-up.
It also encompasses forward looking aspects such as R&D, new product introduction and continuous improvement.
Some overseas travel will also be required
The successful candidate will have:
BSc qualification in a relevant discipline
Proven relevant post-graduate ...
| Location : | Portsmouth (Hampshire, South East, UK, United Kingdom) | | Salary : | £excellent package | | Job Type : | Permanent | | Posted : | 16/11/2009 | |
|
|
|
|
|
|
|
|
Analog Mixed Signal Engineer - RFID/NFC - South West
| Location : | Cirencester (Gloucestershire, South West, UK, United Kingdom) | | Salary : | market rate | | Job Type : | Permanent | | Posted : | 16/11/2009 | |
|
|
|
|
|
|
|
|
An international world leader in it's field, requires an Embedded Software Engineer. You will have 3 years embedded software – C and Assembler· You will have communications experience – IP, GSM/GPRS/CSD, Wi Fi, Low power mesh radio, PLC, etc· You will be capable of working on embedded firmware, systems and comms aspect of AMI· You will have experience of complete system test approach for complex end to end solutions· You will have design for real time application experience You will have structured software design Knowledge/ Skills/ Qualifications Electronics/Software Degree - or equivalent· Good communication skills· Able to deal confidently with customers and suppliers· Able to work to tight deadlines, with focus on ‘right first time’· Able to work individually or as part of a...
| Location : | Stoke-On-Trent (Staffordshire, West Midlands, UK, United Kingdom) | | Salary : | £Negotiable | | Job Type : | Permanent | | Posted : | 16/11/2009 | |
|
|
|
|
|
|
|
|
Field Service Engineer - Healthcare/ Medical This is a Home based Field Service role covering the South East. You must have the HTM 2030 qualification. Salary depends on experience and qualifications but will in the range of 23-28K + car
| Location : | Stevenage (Hertfordshire, South East, UK, United Kingdom) | | Salary : | £23-28k | | Job Type : | Permanent | | Posted : | 16/11/2009 | |
|
|
|
|
|
|
|
|
RFIC Design Engineer - Thames Valley - 50K++
My client based in the Thames Valley are seeking RFIC design Engineers with a Wireless background.
They are working with the latest technologies down to 65nm and predominately with CMOS technologies.
They are paying what it takes to find the perfect match, so please call and enquire about this position if you are interested.
Jonmdarg
01753 828 914
| Location : | Wokingham (Berkshire, South East, UK, United Kingdom) | | Salary : | market rate | | Job Type : | Permanent | | Posted : | 16/11/2009 | |
|
|
|
|
|
|
|
|
An international world leader in it's field, requires a Senior Development Engineer. You will have 5 years experience of analogue/digital electronics design · You will have 3 years development of microcontroller based products· You will have 2 years switched mode power supply design· You will have 1 year designing for EMC approvals· You will have experience of Circuit simulation techniques (Spice) Desirable experience includes the following: Experience in metering or related volume product fields· ASIC design/applications experience· Real Time Software design· Design of products for high volume manufacture· Product design knowledge for utility metering· Electricity metering products and systems· High voltage electronic circuits You will have an Electronics Degree - or equivalent...
| Location : | Stoke-On-Trent (Staffordshire, West Midlands, UK, United Kingdom) | | Salary : | £Negotiable | | Job Type : | Permanent | | Posted : | 16/11/2009 | |
|
|
|
|
|
|
|
|
Software / Hardware Engineer x2 Embedded C and Microcontrollers You will have a good degree in Electronics You will have good inter personnel skills as you will be speaking to customers. This leading designer of controls and sensors is actively looking for experienced Software/ Hardware Design Engineers qualified to degree level with a min of 2:2. You must have at least 3 years commercial experience. Your experience must include embedded software development, electronic circuit design, PCB layout, modification and prototype construction, and microcontroller design. Salary on offer is dependent on experience and offers excellent benefits
| Location : | Southampton (Hampshire, South East, UK, United Kingdom) | | Salary : | £neg + excellent benefits | | Job Type : | Permanent | | Posted : | 16/11/2009 | |
|
|
|
|
|
|
|
|
Hardware/Firmware Engineer
The Role
Engineer in technically demanding embedded hardware and firmware projects across a wide variety of industries.
Participate in client interface, communication and technical programme lead.
Contribute to the growth of the business.
The Qualifications
Hardware/Firmware Engineer with a 1st or a 2.1 degree.
Track record of hardware electronics design with advanced processors and FPGAs.
Experience of system level design.
Working knowledge of C/C++ in embedded applications.
The Rewards
Competitive salary and benefits.
Professional development into a variety of technical, business and leadership roles.
Participating in a fast moving, world class business, with the opportunity to make a visible contribution to the long term success a...
| Location : | Hertfordshire, South East, UK, United Kingdom | | Salary : | £excellent package | | Job Type : | Permanent | | Posted : | 20/11/2009 | |
|
|
|
|
|
|
|
|
An exciting opportunity has arisen for an experienced Engineer with a background in Automated Transmissions and Electronic Control and Calibration.
JOB DESCRIPTION: SENIOR ELECTRONICS ENGINEER
KEY DUTIES & RESPONSIBILITIES:
Reporting to the Chief Engineer you will be required to support projects in Europe, China and other locations. The role will include supplier management, system specification, FMEA, OBD testing, CAN interfacing, support of the calibration team and vehicle / rig test support (including some wiring).
ESSENTIAL SKILLS/ EXPERIENCE:
* An understanding and experience of automated transmissions, their mode of operation from both electronic and control perspectives is essential in the role. The prospective candidate must be able to...
| Location : | Warwickshire, West Midlands, UK, United Kingdom | | Salary : | £30 per hour | | Job Type : | Contract | | Posted : | 20/11/2009 | |
|
|
|
|
|
|
|
|
Firmware/ Hardware Design and Development Engineer The duties of the Firmware/ Hardware Design and Development Engineer include the design and development of digital and analogue circuits and subsystems and the drafting of appropriate software/firmware to meet the requirements of the development project. The current priority is the development of real time digital signal processors for the base band signals of special purpose radio direction finding equipment and the control and display of same. However, much of the other work is designing controlling circuits for signal switching units of various types. Relevant Experience: Embedded Systems development using C/C++ and Assembler on at least one industry standard processor but with a strong preference for PIC based experience. Some exper...
| Location : | Reading (Berkshire, South East, UK, United Kingdom) | | Salary : | £30-40k | | Job Type : | Permanent | | Posted : | 19/11/2009 | |
|
|
|
|
|
|
|
|
Process Development Engineer/Electronics/Process Development
Sedgefield
Salary 30,000 - 37,000 plus Benefits
Our client is a U.K. wide resource to stimulate and drive innovation within various industry sectors.
They are currently looking to recruit a number of candidates to work in our clients Sedgefield facility, to help support the continued expansion of their successful project via the delivery of collaborative development programmes.
Reporting to the Senior Process Development Engineer the jobholder will have responsibility for work on a variety of projects related to flexible electronics. The work encompasses process development and device fabrication, at times working to tight, customer focused, delivery schedules. They are seeking someone with a proven track record in ...
| Location : | Sedgefield (Cleveland, North East, UK, United Kingdom) | | Salary : | Salary £30,000 - £37,000 plus Benefits | | Job Type : | Permanent | | Posted : | 18/11/2009 | |
|
|
|
|
|
|
|
|
Electronic engineer senior engineer Gateshead tyne&wear Salary 35k to 45k
Qualifications required :-
xF0B7; PhD or BEng/BSc in electrical or electronic engineering
xF0B7; Minimum 5 years relevant experience
Must have experience and skills:-
xF0B7; Design and development experience using power MOSFETs or IGBTs
xF0B7; Design and development of power electronics for applications of more than 100W.
xF0B7; Design and test of power electronic products to meet EMC standards
xF0B7; Thermal design of electronic equipment rated at more than 100W
xF0B7; Familiar with requirements of UL and CE marking
xF0B7; Variable speed motor drives
xF0B7; Design of off line mains voltage switching power supplies
xF0B7; Precision analogue circuits
xF0B7; Microprocessor control
Le...
| Location : | Tyne and Wear, North East, UK, United Kingdom | | Salary : | £45000 per annum | | Job Type : | Permanent | | Posted : | 17/11/2009 | |
|
|
|
|
|
|
|
|
Image Signal Processing (ISP) Software Engineer - c50'000 - Cambridge
This is an opportunity for a talented and creative software engineer, to join an extremely strong technical team on the development of software for our low power multimedia processor VideoCore.
The ideal candidate will have an excellent academic background and possess at least 2 of the following:
- C and assembler development skills on an embedded platform
- Expertise in efficient and highly-optimised image processing and pixel manipulation techniques
- Knowledge of digital cameras and in-camera processing algorithms
- Experience of combined software and hardware algorithm design.
Above all, we are looking for a committed and highly motivated individual, who is able to make an outstanding contribution to ...
| Location : | Cambridge (Cambridgeshire, East Anglia, UK, United Kingdom) | | Salary : | market rate | | Job Type : | Permanent | | Posted : | 16/11/2009 | |
|
|
|
|
|
|
|
|
Manufacturing Development Engineer Manufacturing Engineer - Medical - Humberside Manufacturing Engineer required for a medical product company in Hull. Candidates must have a degree in an engineering discipline, or an HNC plus a number of years relevant experience of manufacturing / process engineering in high volume manufacturing environments. You will need to be a ‘process expert’ which includes all facets i.e. tooling, materials, machines, packaging etc. You main purpose is to implement your considerable expertise in the field of high volume medical device manufacturing. Other duties and accountabilities include: Promote and maintain high standards of H & S and environmental obligations in accordance with policy To perform all activities in compliance with relevant GMP and Quality...
| Location : | Hull (Humberside, North East, UK, United Kingdom) | | Salary : | £Negotiable | | Job Type : | Permanent | | Posted : | 16/11/2009 | |
|
|
|
|
|
|
|
|
Senior Software Engineer - Windows 3D Graphics, UI - Essex You will be developing a PC based simulation system You will have written some sort of Game or Simulation systems. (Used OpenGL or Direct X) You will have good understanding of simulation graphics or rendering. You ideally will have Device Drivers and test level GUI based applications and a full understanding of PC configuration & control are essential. You will have C or C++ in a windows development environment. Visual C++, COM, GUI skills would be useful. Knowledge of PCI interfacing would be useful. Knowledge of Graphics and 3D rendering would also be useful. The successful candidate must have a degree, or equivalent, in software engineering or a related discipline. You will designing real time physical modelling...
| Location : | Southend on Sea (Essex, South East, UK, United Kingdom) | | Salary : | £3500-45000 | | Job Type : | Permanent | | Posted : | 16/11/2009 | |
|
|
|
|
|
|
|
|
Junior Electrical / Electronics Product Development Engineer - Milton Keynes - 25k - 30k
Our client are market leaders in the provision of innovative environmental technology solutions to a diverse range of market sector end users, and as a result of continued success and a planned programme of strategic growth, are now seeking to recruit a dynamic, enthusiastic and highly self motivated Electrical and Electronics Product Development professional to compliment their established Project team.
The successful candidate will be degree qualified in Electrical and Electronic Engineering, and will be able to demonstrate at least 2years experience of project management and product development within a manufacturing environment incorporating electrical and electronic technology.
Due to th...
| Location : | Milton Keynes (Buckinghamshire, South East, UK, United Kingdom) | | Salary : | £25000 - £30000 per annum + benefits | | Job Type : | Permanent | | Posted : | 21/11/2009 | |
|
|
|
|
|
|
|
|
Delphi Software Engineer - Berkshire 30000-45000 You must have extensive Delphi Skills The design development and test of Windows based software programs. Relevant Experience: You will need Delphi and UDP and TCP/IP Internet, DLL, database and device driver development. You will move to future programs will use other programming languages like C# and .net You will be fully conversant with MS Office, MS Project, MS Access, MS Excel Ideally you will be educated to degree level in computer science, electronics, physics, mathematics or related science subject .
| Location : | Reading (Berkshire, South East, UK, United Kingdom) | | Salary : | £30-45000 | | Job Type : | Permanent | | Posted : | 19/11/2009 | |
|
|
|
|
|
|
|
|
Test / Quality Engineer (Consumer Electronic Product Evaluation) to 30k
The Quality Assurance Engineer / Test Engineer will be responsible for testing and evaluating a wide range of products from Consumer Electronics products like Netbooks, Digital Cameras, Software etc. to Security Products like Security Recorders and Cameras. You will take full responsibility for the product and sign off whether the product can be brought in to the UK for sale.
SALARY: 25k+ Negotiable, plus bonuses to possible 30K
BENEFITS: Medical insurance plus other excellent benefits.
LOCATION: Cardiff, South Wales
POSITION: Product Evaluator (Quality Assurance / Test Engineer)
You may have experience in the following areas: QA Technician, Quality Assurance Technician, Quality Assurance Engineer, QA Engin...
| Location : | South Glamorgan, Wales, UK, United Kingdom | | Salary : | £25000 to £30000 per annum | | Job Type : | Permanent | | Posted : | 19/11/2009 | |
|
|
|
|
|
|
|
|
Electronics Design Engineer - Power Supply / SMPS - Essex Working in a team of 10 people in the UK R&D centre of a Global Electronics Company your role will be the design and development of new power electronics products You must be a qualified to at least HNC level (ideally Degree) with a minimum of 2 years experience in switch mode power supply design, however, experience of the following would be an advantage:- Analogue Design, Digital Design, Control Circuit Design, PCB layout techniques, component selection, thermal management and MTBF We are looking for a self-motivating person with an ability to schedule their own workload, who is capable of providing technical control of own development projects. Need to have conceptual design experience and an ability to meet high volume ...
| Location : | Chelmsford (Essex, South East, UK, United Kingdom) | | Salary : | £neg | | Job Type : | Permanent | | Posted : | 18/11/2009 | |
|
|
|
|
|
|
|
|
We are looking for a Software/Hardware/Electronics Design Engineer to be involved in the development of industrial instrumentation products and common electronic platforms. The role will involve electronic hardware and embedded software design work from first concept through to product manufacturing. You will design, development and testing of electronic hardware and embedded software for instrumentation products You will record design conformance and ensure the product and documents meet internal and external standards and specifications You will work to demanding technical performance, cost and time targets You will be happy working with other design engineers together with cross functional members of new product introduction teams You will have a good degree in Electronic Engineeri...
| Location : | Cambridge (Cambridgeshire, East Anglia, UK, United Kingdom) | | Salary : | £29,999 | | Job Type : | Permanent | | Posted : | 18/11/2009 | |
|
|
|
Job Search Home
Country
Industry Job Sites
Help for Jobsite
Introduce a Friend
Login
Job Seeker Site
Recruiter Site
RSS | Local Jobs | Jobs
| Job Search
| Browse Jobs
| Advertise Jobs
| Blog
| Site Map
