|
|
|
|
Research Engineer: Loads Control based Bristol salary TBA with the successful applicant
Applicants will need the following experience and qualifications (25.37)
Engineering Physics or Mathematics University Degree with either: PhD in the application and/or development of numerical methods applied to complex engineering problems or minimum 3-4 years relevant experience in Industry or Research establishment on methods development and/or application to support multidisciplinary aircraft analysis and experience
within the field of Aerodynamics/Aeroelastics. Applicants will need previous experience in the areas of aircraft load control and aeroelastics. They should also have an ability to apply numerical analysis tools (including CFD and aircraft loads model), interpret results and devel...
| Location : | Bristol (Avon, South West, UK, United Kingdom) | | Salary : | Negotiable | | Job Type : | Permanent | | Posted : | 23/11/2009 | |
|
|
|
|
|
|
|
|
My client is currently seeking Hardware Engineers to work on Defence Communication projects. Experience of design and development of digital hardware is essential. Must have previous Security Clearance or ability to gain clearance before starting.
Main Duties of this Position
* Detailed circuit implementation of digital hardware in accordance with module requirements, to create innovative and reliable hardware solutions.
* Design, simulation, prototype and evaluation of new and evolving technical solutions.
* To accept technical responsibility for all or part of a project.
* To be involved in the planning and estimation of project schedules.
* Collaboration with other engineering disciplines and departments to ensure that requirements are translated into effective solutions.
* To ...
| Location : | Gloucestershire, South West, UK, United Kingdom | | Salary : | £35000 - £42500 per annum + Pension | | Job Type : | Permanent | | Posted : | 24/11/2009 | |
|
|
|
|
|
|
|
|
Main Duties of this Position
* Detailed circuit implementation of digital hardware in accordance with module requirements, to create innovative and reliable hardware solutions.
* Design, simulation, prototype and evaluation of new and evolving technical solutions.
* To accept technical responsibility for all or part of a project.
* To be involved in the planning and estimation of project schedules.
* Collaboration with other engineering disciplines and departments to ensure that requirements are translated into effective solutions.
* To perform schematic capture and component selection ensuring that both design and regulatory requirements are satisfied.
* Responsibility for the overall design and supervision of PCB layout.
* Creation of design, verification and te...
| Location : | Gloucestershire, South West, UK, United Kingdom | | Salary : | £40 per hour | | Job Type : | Contract | | Posted : | 27/11/2009 | |
|
|
|
|
|
|
|
|
An ideal opportunity for a Principle IRSE Signal Design Engineer to move into a Verifier position
The Role and responsibilities:
With your proven ability to plan and implement delivery programmes, you will lead a
Signalling design team to deliver design to time, safely, profitably and to customer
satisfaction, ensuring all engineering details meet defined principles and processes. Other
important aspects of your role will be carrying out performance reviews, assisting with
testing and commissioning and helping train and develop junior staff. The significant
element of interface with client, testing, installation and other department's means good
communication and influencing skills will be important, along with customer focus and
commercial and financial awar...
| Location : | East Riding of Yorkshire (UK, United Kingdom) | | Salary : | Negotiable | | Job Type : | Permanent | | Posted : | 23/11/2009 | |
|
|
|
|
|
|
|
|
Several Superb opportunities have arisen for experienced Software Engineers to work for a leading Defence Communications company. Successful candidates must have experience of Communications, knowledge of C or C++, including embedded and Real-Time systems
Job Title Senior Software Engineer
Primary Purpose of the Position
To provide significant technical input to the design, implementation and testing of embedded and general control software projects in a communications environment.
Main Duties of the Position
* Design, development and implementation of software, primarily in C or C++, including embedded systems, control and real-time in a communications related environment.
* To take responsibility for the design and quality of areas of the software system, an...
| Location : | Gloucestershire, South West, UK, United Kingdom | | Salary : | £35 - £42 per hour | | Job Type : | Contract | | Posted : | 24/11/2009 | |
|
|
|
|
|
|
|
|
An excellent opportunity for an experienced Reliability Engineer to work within a specialist Aerospace organisation.
Support ILS Manager and Principal Reliability Engineer to develop best in class Reliability processes and Reliability capability.
- Deliver guidance to Design Team on efficient route to certification based on interpretation of requirements and proposed level of compliance.
- Assist in the planning and implementation of performance demonstrations and trials.
Key Responsibilities:
- Supporting the ILS Manager and Principal Reliability Engineer in implementation of reliability programmes; prediction and modelling of reliability aspects of complex mechanical, electrical and electronic systems.
- Delivery of specialist advice to achieve required ...
| Location : | Wimborne (Dorset, South West, UK, United Kingdom) | | Salary : | £30000 - £40000 per annum | | Job Type : | Permanent | | Posted : | 24/11/2009 | |
|
|
|
|
|
|
|
|
Leap29 are looking for an experienced chief engineer to work on a container ship, offshore USA. The role will involve overseeing cadet training procedures. This is a contract position. Salary will be paid on a daily rate which is negotiable based on experience.
Prospective candidates must have at least 2 years experience of being a chief engineer and have a visa to work in the US or be in a position to apply for a visa quickly.
Applications should include:
1. Your rank
2 The types of vessels you have worked on (including names and age of vessels)
3. The Engine capacities you have managed.
4. The Gross Registered Tonnage of the ships you have worked on
Applications should be made to leap29. For more information please contact Matthew Lloyd on the details provided.
| Location : | UK, United Kingdom | | Salary : | Negotiable | | Job Type : | Contract | | Posted : | 27/11/2009 | |
|
|
|
|
|
|
|
|
Leap29 are looking for an experienced chief engineer to work on a container ship, offshore USA. The role will involve overseeing cadet training procedures. This is a contract position. Salary will be paid on a daily rate which is negotiable based on experience.
Prospective candidates must have at least 2 years experience of being a chief engineer and have a visa to work in the US or be in a position to apply for a visa quickly.
Applications should include:
1. Your rank
2 The types of vessels you have worked on (including names and age of vessels)
3. The Engine capacities you have managed.
4. The Gross Registered Tonnage of the ships you have worked on
Applications should be made to leap29. For more information please contact Matthew Lloyd on the details provided.
| Location : | UK, United Kingdom | | Salary : | Negotiable | | Job Type : | Contract | | Posted : | 26/11/2009 | |
|
|
|
|
|
|
|
|
QUALITY ENGINEER
My client based in Poole require an experienced Quality Engineer to run our ISO 9001:2000 QMS. The successful candidate will have good communication and organisation skills.
In order to be considered for this role you MUST have previous experience of Auditing and experience of working to NQA-1 requirements.
(Some travel will be necessary to perform the auditing requirements.)
Skills/knowledge in the following areas would be an advantage:
QMS Documentation preparation
Word Processing
NQA-1
Commercial Grade Dedication
AS91000
Electronics Manufacturing Industry
QMS Trainer
Health & Safety and Environmental
PERMANENT
MON - FRI
37.5 HOURS
| Location : | Poole (Dorset, South West, UK, United Kingdom) | | Salary : | market rate | | Job Type : | Permanent | | Posted : | 24/11/2009 | |
|
|
|
|
|
|
|
|
Network Support Engineer
Provide specialist technical support to Network Operations staff on terrestrial network to aid in faultfinding and service restoration.
Test and commissioning of new equipment to support the skynet 5 network.
Provide support to Service planning staff to determine optimum routing and connectivity through network.
Monitor network performance to identify and pre-empt capacity bottlenecks or connectivity difficulties.
Liaise with external network engineers and user technical staff to assist in service interruption resolution.
Develop and maintain network operations technical documentation.
Configuration of Cisco Routers, Meridian voice switches,
Volcality muxes, and Nortel Passports together with satellite modems and RF required.
Use and configuration...
| Location : | Wiltshire, South West, UK, United Kingdom | | Salary : | £excellent package | | Job Type : | Permanent | | Posted : | 27/11/2009 | |
|
|
|
|
|
|
|
|
Network Support Engineer, based Bath, salary 35k+
Qualifications, Skills and experience needed by applicantsx2026; must have previous experience of working with and knowledge of satellite communications systems with experience in system engineering an advantage
Work in engineering support role, field service engineer
Knowledge of UK Military Satellite Communications System.
Previous work experience within 1001SU, or associated organisations including DEI
Data Communications Engineering or other relevant qualifications.
Knowledge of ATM, TCP/IP as well as synchronous and asynchronous communications protocols and Nortel Passport and similar switch equipment.
The role is to provide specialist technical support to Network Operations staff on terrestrial network to aid in faultfindin...
| Location : | Bath (Avon, South West, UK, United Kingdom) | | Salary : | £35000 - £42000 per annum | | Job Type : | Permanent | | Posted : | 27/11/2009 | |
|
|
|
|
|
|
|
|
enior Mechanical Engineer based Bristol Area salary TBA with the successful applicant up to c45k
Applicants will be Degree qualified or equivalent in Mechanical Engineering, with considerable experience of most of the following:
Fatigue and fracture assessment
Structural dynamics
Nuclear industry and/or Submarine Nuclear Steam Raising Plant
Stress analysis by hand calculation
Finite Element techniques (preferably Abaqus, Ansys or LS-DYNA)
Pressure vessel design and assessment (e.g. ASME III)
Applicants should to be Chartered Engineers or to have sufficient professional experience to be able to make a successful application for Chartered status.
The rolex2026;.
In addition to your technical expertise, you will use your understanding of mechanical engineering principles an...
| Location : | Bristol (Avon, South West, UK, United Kingdom) | | Salary : | £45000 per annum | | Job Type : | Permanent | | Posted : | 23/11/2009 | |
|
|
|
|
|
|
|
|
Research Engineer - Power Generation
This is a new role to support the energy and power management architectures works.
The successful candidate will be responsible for
developing new research proposals
leading research projects, including the management of sub-contractors, and external suppliers
conducting power generation research in conjunction with other elements and business units
extending Corporate knowledge of power generation, energy and environmental topics
technology transfer into business units
developing the international reputation of the Company
The candidate must be able to work within an international team environment, and must be prepared to travel overseas when required ...
| Location : | Bristol (Avon, South West, UK, United Kingdom) | | Salary : | £excellent package | | Job Type : | Permanent | | Posted : | 25/11/2009 | |
|
|
|
|
|
|
|
|
JOB DESCRIPTION
You will provide a sufficient level of Reliability and Maintainability Engineering knowledge and skills to enable the effective and timely delivery of those tasks and projects upon which you are engaged. You will be expected to deliver products and services that meet business and stakeholder needs. Your main tasks and activities will include, but not be limited to:
*Undertake the day to day discharge of R&M Engineering activities that meet the needs and requirements of the customer and the organisation
*Provide expert support in the following disciplines:
oReliability Analysis, FME(C)A & Safety Analysis
oReliability Centred Maintenance Analysis
oMaintainability & Testability Analysis
oR&M input to Design
oData Recording, Analysis and Corrective Action System (...
| Location : | Yeovil (Somerset, South West, UK, United Kingdom) | | Salary : | £28000 - £30300 per annum + plus benefits | | Job Type : | Permanent | | Posted : | 24/11/2009 | |
|
|
|
|
|
|
|
|
Job Purpose:
The Research and Development Department of the clients Rail Systems is developing a number of next-generation systems to meet the needs of the current and future rail industry.
Ensuring that these systems are safe, reliable and fully compliant with standards is critical to the future business of the company. A Safety Assurance Engineer is required to join the exiting team to support these developments with responsibility for undertaking the production of product safety cases and related material and interaction with regulators and approval bodies.
Essential Requirements:
Degree in computer science, electronic engineering or similar technical engineering based degree;
Membership of professional body (MBCS, MIEE). Likely to be a Chartered Engineer or working towards CE...
| Location : | Chippenham (Wiltshire, South West, UK, United Kingdom) | | Salary : | £35000 - £40000 per annum + benefits | | Job Type : | Permanent | | Posted : | 30/11/2009 | |
|
|
|
|
|
|
|
|
The Contracts Engineer will be responsible for preparing and issuing tender documentation, undertaking tender evaluations and preparing goods and services contracts.
Personal Specification;
HNC/HND Qualified or equivalent within a relevant discipline.
CIPS would be an advantage.
Contracts Administration experience is essential.
Understanding of Commercial Contract Terms and Conditions.
Strong commercial acumen.
Computer literate.
Pro-active and self motivated.
Excellent communication skills.
To apply for this position, candidates must be eligible to live and work in the UK
Matchtech Group Plc is acting as an Employment Agency in relation to this vacancy.
| Location : | Plymouth (Devon, South West, UK, United Kingdom) | | Salary : | £28000 - £35000 per annum | | Job Type : | Permanent | | Posted : | 23/11/2009 | |
|
|
|
|
|
|
|
|
My client is looking for experienced and enthusiastic Safety Consultants to join their dynamic team. This exciting opportunity offers you the chance to utilise your technical leadership skills to make a contribution to a number of safety projects
You will provide project management and technical contribution to safety case development of major defence, aerospace, rail and nuclear projects undertaken by the safety team.
Applicants will have knowledge of the following:
- Defence Standard 00-56
- MoD POSMS
- JSP 430,454,520,375,815, 553 and 518
- Yellow book
You will be conversant in the conduct of most of the following disciplines:
- Safety Management System Development and Safety Management planning
- Safety Case Development
- Indepen...
| Location : | Bristol (Avon, South West, UK, United Kingdom) | | Salary : | £50000 per annum | | Job Type : | Permanent | | Posted : | 24/11/2009 | |
|
|
|
|
|
|
|
|
Marine safety engineers underwater systems Bath salary to 45k
Person Specification:
·An affinity for making the complex simple, in particular providing safety assurance for vehicles that operate in the world's oceans;
·An inquisitive mind, with the acumen to interpret data and information provided by third parties to produce formatted technical reports;
·An academic qualification to at least first degree level, in a relevant engineering-related discipline, or at least 5 years' experience in a marine engineering environment;
·Affiliation with a recognised engineering body, and either registered with, or working towards, Incorporated or Chartered Engineer registration.
The clients staff undertake a key role in assuring the safety of the UK's submarine force and the force's pe...
| Location : | Bath (Avon, South West, UK, United Kingdom) | | Salary : | £43000 - £45000 per annum | | Job Type : | Permanent | | Posted : | 30/11/2009 | |
|
|
|
|
|
|
|
|
An excellent opportunity for a Project Manager to work with a leading defence client on aerospace and military land vehicle projects. Candidates must have experience in a Project Management post within the Defence or Aerospace industry.
Candidates MUST fulfil the following pre-requisites:
- Project Management experience
- Defence Industry or Aerospace experience
- Formal Project Management qualification
- Engineering background
- Be able to gain full SC level Security Clearance for defence projects
- Be able to work in a permanent position in Cheltenham
Job Purpose:
A Project Management role has arisen within the business to co-ordinate activities on numbers of contracts as well as providing technical input to the development of the projects from conce...
| Location : | Cheltenham (Gloucestershire, South West, UK, United Kingdom) | | Salary : | £34000 - £40000 per annum | | Job Type : | Permanent | | Posted : | 23/11/2009 | |
|
|
|
Job Search Home
Country
Industry Job Sites
Help for Jobsite
Introduce a Friend
Login
Job Seeker Site
Recruiter Site
RSS | Local Jobs | Jobs
| Job Search
| Browse Jobs
| Advertise Jobs
| Blog
| Site Map
